Minneapolis-St. Paul
We soften and filter the water where it comes into the house, and put a reverse osmosis tap by the kitchen sink. The system is sized to your house, and you see one price before anything is ordered.
In Minneapolis-St. Paul, it usually starts with one of these three. Each calls for a different fix, so we look at your water before we suggest anything.
Minneapolis and St. Paul soften their river water at the plant, but many suburbs on deep wells do not. Eagan's 2025 water quality report lists 18 to 20 grains per gallon and Burnsville's lists 25 to 26. Scale on fixtures and spots on glasses show what is actually reaching your tap.
Minneapolis Water Works and Saint Paul Regional Water Services both disinfect with chloramine, formed by adding ammonia to chlorine after treatment. If a glass from the kitchen tap tastes or smells off to you, that usually starts with the supply coming into the house, not the faucet.
Rust coloured marks in the sink or the tub, grit caught in the faucet screens, towels and shirts that come out of the wash looking tired. That points to what is dissolved in the water, not to how often you clean.
About Minneapolis Pro Water • Close to home
Minneapolis Pro Water works with households across Minneapolis-St. Paul on the water that comes out of their taps. Some want the scale gone from the shower glass, some want a better glass of water from the kitchen, and some are on a well and want to know where to begin. We look at where your water comes from and what you are noticing, then suggest softening, carbon filtration, reverse osmosis, well treatment or a mix of them. You get a plain answer and a system sized to your house.
First we talk through what you are seeing at the taps. Then we tell you which system fits and what it costs. If you say yes, we put it in and show you how it works.
Tell us whether you are on city water or a well, and what bothers you about it, from the kettle to the laundry. That tells us where to start.
We lay out which system suits your house and your budget, and why. Ask as many questions as you like.
Once you pick a system, we install it, check that it runs properly, and walk you through the few things it needs from you.
Whole house system on city water
$2,699
installed
Homes on a well get their own sizing and their own price.
This is one example setup. Yours gets sized once the assessment is done.
Don't see yours? Add it to your assessment request and we will answer it on the call.
We give you a call and talk through your water together. By the end you know which system we would fit and what it costs. The assessment itself is free.
The written price is the one you pay. If something about your house would change it, we tell you before any work begins.
At the spot where your water line comes in. That is often the basement, a utility room or the garage.
Floor space for the tanks, and enough room above to lift the cabinet lid and reach the bypass.
Keep the cabinet topped up. The setup notes explain it, and that is really all there is.
It does, sized another way. A private well shifts over the year, so it is set up differently from city water. We do both.
The quieter part of the list
Often noticeable in a glass.
Harder to pick out.
No taste to go on.
So the assessment begins with the report your utility puts out on Minneapolis-St. Paul water, rather than a hunch.
We ask for your name, phone and email. We cover the rest on a short call.
(651) 867-2824Call if that is easier than typing.
Email info@minneapolisprowater.com
Serving Minneapolis-St. Paul
The assessment costs nothing. Send your name and number, or give us a call.